installation
|
33
INLAY INSTALLATION
INLAY INSTALLATION
1. Remove Vignette faceplate from unit and lay on a soft surface.
3. Position the inlay face down on the back of the Vignette faceplate
and reinstall the safety screen assembly (reverse Step 2).
4. Reinstall the Vignette faceplate with inlay onto unit—reverse Step 1.
2. Remove 4 screws from the back of the Vignette faceplate in loca-
tions shown below—to remove the safety screen assembly.
Final Install
Remove 4 screws to remove safety screen assembly
| 33
LRI6E / HRI6E Direct Vent Gas Insert
1
05.18.16
919-661