Table of Contents
Advertisement
Enable Wireless Charge Support
Use this feature to enable or disable wireless charging support. The options are Disabled
and Enabled.
Enable FFU Support
Use this feature to enable or disable FFU (Full Flash Update) support. FFU can capture
hard drive information, including partitions. The options are Disabled and Enabled.
SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller(s)
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enabled and Disabled.
SATA Mode Selection
Use this item to select the mode for the installed SATA drives. The options are AHCI and RAID.
SATA Test Mode
Use this item to disable or enable the SATA testing mode. The options are Enabled and
Disabled.
*If this item is set to Disabled, then Software Feature Mask Configuration and Aggressive
LPM Support are available for configuration.
Software Feature Mask Configuration
RAID0
Use this item to disable or enable RAID0 support. The options are Disabled and Enabled.
RAID1
Use this item to disable or enable RAID1 support. The options are Disabled and Enabled.
RAID10
Use this item to disable or enable RAID10 support. The options are Disabled and Enabled.
RAID5
Use this item to disable or enable RAID5 support. The options are Disabled and Enabled.
Intel Rapid Recovery Technology
Use this item to disable or enable Intel Rapid Recovery Technology support. The options
are Disabled and Enabled.
73
Chapter 4: BIOS
Advertisement
Table of Contents
