C7C232-CB-ML User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
OBR1
GPIO1
Location of Mounting Holes
Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (8)
AUDIO
USB0/1
LAN1
HS1
BUZ1
PCH
NGFFB1
I-SATA5
I-SATA4
I-SATA3
CN1
I-SATA0
I-SATA1
USB4/5/6/7
(3.0)
C7C232-CB-ML
Rev. 1.00
CPU
DBGH1
PCHDR1
22
Standoffs (8)
Only if Needed
KB/MOUSE
FANS1
FANS2
CN2
FANC1
BT1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
TPMH1