Supermicro C7C232-CB-ML User Manual page 85

Force Single Rank
Set this feature to Enabled for Rank 0 to be used for each DIMM module. The options are
Disabled and Enabled.
Time Measure
Use this feature to enable or disable the printing of the time it takes to execute the memory
reference code (MRC). The MRC ensures that the RAM is functioning properly. The options
are Disabled and Enabled.
Memory Thermal Configuration
Memory Power and Thermal Throttling
DDR PowerDown and idle conuter
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are PCODE and BIOS.
REFRESH_2X_MODE
Use this feature to select the refresh mode. The options are Disabled, 1-Enabled for WARM
or HOT, and 2-Enabled HOT only.
Dram Power Meter
The following memory information will display:
•
Energy Scale Factor
•
Idle Energy DIMMA1
•
PowerDown Energy DIMMA1
•
Activate Energy DIMMA1
•
Read Energy DIMMA1
•
Write Energy DIMMA1
•
Idle Energy DIMMA2
•
PowerDown Energy DIMMA2
•
Activate Energy DIMMA2
•
Read Energy DIMMA2
85
Chapter 4: BIOS