Supermicro C7C232-CB-ML User Manual page 84

C7C232-CB-ML User's Manual
•
Total Memory
•
VDD
•
DIMMA1
•
DIMMA2
•
DIMMB1
•
DIMMB2
•
Memory Timings (tCL-tRCD-tRP-tRAS)
Maximum Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules. The
options are Auto, 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, and 3200.
Max TOLUD
This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable
DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and
TSEG, respectively, if these devices are enabled. The options are Dynamic, 1 GB, 1.25
GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 GB, 3.25 GB, and 3.5 GB.
Energy Performance Gain
Use this feature to enable or disable the energy performance gain. The options are Disabled
and Enabled.
The following memory information will display:
•
EPG DIMM Idd3N
•
EPG DIMM Idd3P
Memory Scrambler
Select Enabled to enable memory scrambler support. The options are Disabled and
Enabled.
Channel A DIMM Control
Use this feature to enable or disable the DIMMs on channel A. The options are Enable
both DIMMs, Disable DIMMA1, Disable DIMMA2, and Disable both DIMMs.
Channel B DIMM Control
Use this feature to enable or disable the DIMMs on channel A. The options are Enable
both DIMMs, Disable DIMMB1, Disable DIMMB2, and Disable both DIMMs.
84