UDI R/C VOYAGER U845Wifi User Manual page 17

Remote Control Interface
Home Page Icon
Click on the icon and back to home page.
Virtual Reality Mode
Click on the icon to enter virtual reality mode to experience first
person view (only available when using with a VR headset).
Click on the icon again to exit from virtual reality mode.
Flight Route Setting Mode
Click on this icon and it turns red. Draw a flight route in the right area. The drone
will fly according to the flight route. Click on the icon again to exit from Flight Route
Setting Mode. The icon turns white.
EMERGENCY
The icon is red by default. Click this icon and the propellers will stop immediately.
The drone will fall down to the ground straightly.
Tip: Do not use the emergency stop function unless in emergency situation.
TF Card
If there is no TF Card in the drone, the icon shows as
There is TF Card in the drone, the icon shows as
Remote Control Signal
To show the drone's WiFi signal strength.
Setting
Click on this icon to set some parameters, and click again to exit.
Trimming
Transmission quality
Virtual Control Stick
The virtual control stick is hidden by default. Click on the icon to turn on the
virtual control stick.
Gravity Induction Mode
Click on this icon to enter gravity induction control mode. (only available for
flying left / right and forward / backward). Click on the icon again to exit
from gravity induction control mode.
Emergency Stop
SETTING
Save Reset
720P 480P
Remote Control
.
Click on "Save" to save trimming setting.
Choose "Reset" for factory reset.。
Click on "720P" or "480P" to choose real
time transmission resolution.
17
L R
.