Fujitsu fi-4860C Operator's Manual page 236

28. Setting Brightness
1) Press (Next button) or
<Screen28>.
2) At <Screen28>, to adjust the Brightness, press
select [Yes].
Press (Enter button) to confirm the selection. <Screen28-1> is displayed.
If Brightness adjustment is not required, select [No] and press
button).
The blinking item is the one selected.
HINT
3) At <Screen28-1>, to adjust the front-side brightness, press
button) and select [Front].
If back side needs brightness adjustment, press
select [Back].
If the brightness needs to be increased, press
button is pressed the brightness value increases by 1.
If the brightness needs to be decreased, press
time the button is pressed, the brightness decreased by 1.
4) Press (Enter button) to confirm the setting.
Press (Exit button), and the LCD display goes back to [Ready] screen.
(Previous button) and let LCD display
<Screen28>
! 8 B r
2
C h a n g
<Screen28-1>
2 8
! - 1
F o n t :
r
i g h t n e s
e ? N o / Y
(Right arrow button) and
B t
r i g h n
0 B a k
c
(Left arrow
(Right arrow button) and
(Next button). Each time the
(Previous button). Each
7.3 Setup Mode Details
s
e s
7
(Enter
e s s
: 0
213