Fujitsu fi-4860C Operator's Manual page 212

10. Setting Short document scan mode(Paper Length setup)
1) Press (Next button) or
<Screen10> .
2) At <Screen10>, press
select the proper setting for the document to scan.
The blinking item is the one selected.
HINT
(1) [Normal] is blinking: This mode is for scanning documents longer than
(2) [Short] is blinking:
(3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
(Previous button) and let LCD display
<Screen10>
! 1 0 P a
= N o r m
(Left arrow button) or
80mm or 3.15inches.
This mode is for scanning documents which length
is 80mm or less, 3.15inches or less.
p e r L e n
a l / S h o r
(Right arrow button) and
7.3 Setup Mode Details
g t h
t
7
189