Background Color Areas - Fujitsu fi-4860C Operator's Manual

6.5 Background Color Areas

Paper white detection is done in the shaded area as shown in the Figure below. The top
3mm on both sides of a document, should have no printing in this area.
When using dropout color, the color can be in this area. If this cannot be followed, turn
the white level follower off when reading.
For the details on dropout color, please refer to "Appendix-1 Dropout Color" on page AP-
1.
Reading
reference
position
152

6.5 Background Color Areas

Grounding color
(white) or drop-out
color area
Main scanning direction
3 mm (0.12")