Selecting And Configuring Math - Keithley 6517a Getting Started Manual

Model 6517A Getting Started Manual
Ratio:
where:
Log10 (logarithmic):
where:
Selecting and configuring math
The procedure to select and configure a math calculation is summarized as follows:
1.
2.
X is the normal display reading
Y is the user-entered reference value
Ratio is the displayed result
X is the input reading
Y is the logarithmic result
Press CONFIG and then MATH to display the following math filter menu options:
NONE: Select no calculation when the MATH key is pressed.
POLYNOMIAL: Select the polynomial calculation and enter the constants (a2, a1,
and a0).
PERCENT: Select the percent calculation and enter the target value (reference).
% DEV: Select the percent deviation calculation.
DEVIATION: Select the deviation calculation.
RATIO: Select the ratio calculation.
LOG10: Select the logarithmic calculation.
Use the menu items to select and configure math. A menu item is selected by plac-
ing the cursor (using
are changed using the cursor keys and the RANGE keys, and then pressing
ENTER. See "Menus" if you need more information to navigate through the menu
structure.
X
Ratio = ---
Y
log X = Y
10
and keys) on it and pressing ENTER. Parameter values
Measurement Options 2-21