Tannoy QFLEX User Manual page 14

Units Tab
Verify that you are using the correct measurement units
Misc Tab
By checking this box a shadow will be cast behind venue planes if they are raised above floor level
Help
Here you will find programme info, including version number and a copy of this user manual in PDF format. The first
step is to select your QFlex model, using the BeamEngine software is a simple and effective way of selecting the
correct model.
Which QFlex system you specify depends on a number of criteria:-
Distance: Farther areas you wish to reach will require a larger QFlex column.Typically, as a rule of thumb a QFlex 16
will be used to distances of 20m(66ft), and a QFlex 48 in excess of 80m(260ft)
Low Frequency Control: The larger the QFlex column, the more effective control at lower frequencies can be achieved.
This also goes for effective steering control at lower frequencies. QFlex 16 (700Hz) >>>> QFlex 48 (200Hz)
SPL Requirements: The larger QFlex arrays will have the ability to produce higher SPL levels.
For the purposes of this tutorial we will choose A QFlex 32