Tannoy QFLEX User Manual page 38

QFlex Range
8 16 24
The joining hardware parts are packed with the QFlex modules in
will be marked 'HARDWARE'
The Table below shows the list of joining hardware parts and bracketry supplied with each QFlex model.
QFlex Product
product number
QFlex 8 8004 0100
QFlex 16 8004 0110
QFlex 24 8004 0120
QFlex 32 8004 0130
QFlex 40 8004 0140
QFlex 48 8004 0150
A QFlex array will consist of either just a master unit (QFlex 8 or 16) or a master unit with up to three additional slave
units (QFlex 48)
The master unit will always be positioned at the bottom of any speaker column and will be slightly longer to
accommodate the connectors and power indicator.
The top of a slave unit will be the same as the top of the master unit to allow another slave unit to be mechanically
VNET™ command, returning to operating mode either upon the detection of audio or a 'power up' VNET™ command.
QFlex products have analog and AES* audio inputs, and use VNET™ for monitoring and control.
For mechanical integrity, thermal and EMC reasons, the electronics module is in a separate cavity from
the transducers.
QFlex products are designed to meet the safety requirements of UL60065 7th edition & EN60065 2002.
QFlex meet the EMC requirements of Fcc15a and EN55103* AES inputs will be included as standard in 2009
32 40 48
Cabinet joining
plate with hinges
7600 1770
0
0
1
1
2
2
Joining plate - side Joining plate
(inc 20 screws)
7600 1800 6883 0267
0
0
1
1
2
3
Wall
- rear bracket
8001 5330
0 1
0 1
0 1
0 1
0 2
1 2