Table of Contents
Advertisement
3.1 BEAMENGINE PROGRAMME
There are two programme modules to install. For both the installation is fully automatic. However, please note
the following:-
Initialization time: Due to large data-files the installation may need a considerable time to load. Also, on the very first
run of QFlex BeamEngine the MatLab Library needs to initialize, which cause a short delay.
Windows Vista: Do not install QFlex BeamEngine to the standard folder but elsewhere, for instance
C:\Tannoy\QFlex\.
Restricted User Rights: If you operate your computer under restricted user rights then it is best to install the \MatLab
Library first and then to install QFlex BeamEngine. If you currently work with administrator rights on your PC the order of
installation does not matter.
MatLab owners: If you have already installed MatLab or a MatLab Runtime Library on your computer, the modules
should be of version 7.7. Otherwise install the provided package in parallel.
3.2 MATLAB RUNTIME LIBRARY MCR
The MatLab Runtime Library MCR needs to be installed separately. This MatLab Runtime Library is a special version
(v7.7) and is exclusively provided to you by Tannoy.
1. Log in as administrator, start the automatic installer by clicking on the link below and follow instructions.
2. Use the default settings.
3. Install MatLab Runtime Library v7.7
3.3 QFLEX BEAMENGINE APPLICATION
Install the QFlex BeamEngine module after the MatLab Library. The install is automatic. Under Vista it is recommended
to install into another directory than the one suggested (say "C:\Tannoy\QFlex\" for example).
1. Log in as administrator, start the automatic installer by clicking on the link below and follow instructions.
2. Install Tannoy QFlex
3.4 UNINSTALLING
Either go to Start Menu/Settings/Software or to the program-folder of QFlex, there double click unins000.exe
3.5 UPDATES
Install QFlex in the same location. The MatLab Library will not need to be reinstalled.
Hide quick links:
Advertisement
Table of Contents
