Dhcp Server Configuration Examples; Static Ip Address Assignment Configuration Example - HP 6125XLG Layer 3-Ip Services Configuration Manual

Execute display commands in any view and reset commands in user view.
Task
Display information about IP address conflicts.
Display information about lease-expired IP
addresses.
Display information about assignable IP
addresses.
Display information about assigned IP
addresses.
Display DHCP server statistics.
Display information about DHCP address
pools.
Clear information about IP address conflicts.
Clear information about lease-expired IP
addresses.
Clear information about assigned IP
addresses.
Clear DHCP server statistics.

DHCP server configuration examples

DHCP networking includes the following types:
• The DHCP server and clients reside on the same subnet and exchange messages directly.
The DHCP server and clients are not on the same subnet and they communicate with each other
•
through a DHCP relay agent.
The DHCP server configuration for the two types is identical.

Static IP address assignment configuration example

Network requirements
As shown in
DNS server address, and gateway address from Switch A (DHCP server).
The client ID of VLAN-interface 2 on Switch B is:
0030-3030-662e-6532-3439-2e38-3035-302d-566c-616e-2d69-6e74-6572-6661-6365-32.
The MAC address of VLAN-interface 2 on Switch C is 000f-e249-8050.
Figure 17, Switch B (DHCP client) and Switch C (BOOTP client) obtain the static IP address,
Command
display dhcp server conflict [ ip ip-address ]
display dhcp server expired [ ip ip-address | pool pool-name ]
display dhcp server free-ip [ pool pool-name ]
display dhcp server ip-in-use [ ip ip-address | pool
pool-name ]
display dhcp server statistics [ pool pool-name ]
display dhcp server pool [ pool-name ]
reset dhcp server conflict [ ip ip-address ]
reset dhcp server expired [ ip ip-address | pool pool-name ]
reset dhcp server ip-in-use [ ip ip-address | pool pool-name ]
reset dhcp server statistics
47