Verifying The Configuration - HP 6125XLG Layer 3-Ip Services Configuration Manual

[SwitchB-Vlan-interface20] ip address 20.1.1.2 24
[SwitchB-Vlan-interface20] quit
# On Switch A, configure two static routes to the destination IP address.
<SwitchA> system-view
[SwitchA] ip route-static 1.2.3.4 24 10.1.1.2
[SwitchA] ip route-static 1.2.3.4 24 20.1.1.2
[SwitchA] quit
# On Switch A, display FIB entries matching the destination IP address 1.2.3.4.
<SwitchA>dis fib 1.2.3.4
Destination count: 1 FIB entry count: 2
Flag:
U:Useable
R:Relay
Destination/Mask
1.2.3.0/24
1.2.3.0/24
# On Switch A, configure per-flow load sharing based on the source IP address and destination IP
address.
<SwitchA> system-view
[SwitchA] ip load-sharing mode per-flow dest-ip src-ip

Verifying the configuration

# Verify that Switch A implements load sharing.
[SwitchA] display counters outbound interface Ten-GigabitEthernet
Interface
XGE1/1/5
XGE1/1/6
XGE1/1/7
XGE1/1/8
XGE1/1/9
XGE1/1/10
G:Gateway H:Host
F:FRR
Nexthop
10.1.1.2
20.1.1.2
Total (pkts)
0
0
0
0
1045
1044
B:Blackhole D:Dynamic
Flag OutInterface/Token
USGR Vlan10
USGR Vlan20
Broadcast (pkts)
0
0
0
0
0
0
114
S:Static
Label
Null
Null
Multicast (pkts) Err (pkts)
0
0
0
0
0
0
0
0
0
0
0
0