3.2.4 Frame Earth Connection
CAUTION
For safety reasons, fix the front cover and cable cover of the PBX with screws.
3.2.3.1 Removing/Attaching the Cable Cover
If you prefer, you can remove the cable cover.
Removing the Cable Cover
1.
Slide out the cable cover and open it.
2.
Holding the cable cover open at about a 90 angle, remove the front cover by pushing it in the direction of
the arrow as shown below.
Attaching the Cable Cover
1.
Fit the cable cover to the main unit as shown below, and then close the cable cover.
CAUTION
For safety reasons, fix the front cover and cable cover of the PBX with screws.
3.2.4 Frame Earth Connection
1.
Loosen the screw.
2.
Insert an earthing wire (user-supplied).
3.
Tighten the screw.
44