Panasonic KX-HTS824 Getting Started page 71

A Ethernet Straight Cable
(1) To a Switching Hub
Connecting an AC Adaptor to an IP Telephone
Some SIP phones comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on
your network, these IP telephones can receive the necessary power supply from the network through the
network cable. In this case, an AC adaptor is not needed for the IP telephone. However, if PoE is not availa-
ble, you will need to connect an AC adaptor to the IP telephone.
Note
Use only the specified type of AC adaptor for each IP telephone. For details, refer to the documentation
of your IP telephone.
Example: KX-HDV230
A Ethernet Straight Cable
(1) To a Switching Hub
(2) To Wall Socket
A
A
(1)
3.5.2 LAN Connections for IP Telephones
(1)
(2)
71