Hook the main unit on the screw heads.
Mounting on a Concrete
The included screws may be used when mounting the main unit on a concrete or mortar wall. User supplied
anchor plugs are also necessary.
Place the template (found on the last page of this manual) on the wall to mark the 2 screw positions.
225 mm (8-7 / 8 in)
When you print out the template, the distance on the paper output may deviate slightly from the indi-
cated measurement. In this case, use the indicated measurement.
Drill holes in the wall as marked and fit the anchor plugs (not included) into the holes.
6.4 mm (1/4 in)
3.2.8 Wall Mounting