Emerson Rosemount 5900 Reference Manual page 94

Rosemount 5900 Series
6.2 SERVICE
6.2.1 Viewing Input
and Holding
Registers
6-2
Preliminary
Measured data is continuously stored in input registers of the Rosemount
5900 radar level gauge. By viewing the Input registers you can check that the
device is working properly.
The holding registers store various parameters which are used to configure
the 5900 gauge for various applications.
By using the Rosemount TankMaster WinSetup program, holding registers
can be edited simply by typing a new value in the appropriate value input field.
Some holding registers can be edited in a separate window. In this case
individual data bits can be changed.
To view input or holding registers of a device do the following:
1. Start the TankMaster WinSetup program.
2. In the TankMaster WinSetup workspace window select the 5900 gauge.
3. Click the right mouse button and choose the View Input/View Holding
Registers option, or from the Service menu choose Devices/View
Input/View Holding Registers.
Reference Manual
300520EN, Rev AA
November 2009
Section 6. Service and Troubleshooting