Figure 2. Limitless™ Wls Single Switch Adapter Bt1 & Bt2; Figure 3. Limitless™ Wls Single Switch Adapter Bt1 & Bt2 - Honeywell 50054911 Installation Manual

Limitless™ Series WLS Limit Switch
Step 1: Each conductor color in the user-supplied cable needs to be connected to the end-user supplied switch as follows (see Fig-
ure 2 as an example):
BROWN wire: Connect to common terminal of the user-supplied switch
BLACk wire: Connect to normally open terminal of the user-supplied switch
BLUE wire: Connect to normally closed terminal of the user-supplied switch
Figure 2. Limitless™ WLS Single Switch Adapter BT1 & BT2 User-supplied Wire Conductors to Switch Terminal
Connections
Step 2: Connect the user-supplied mating connector w/cable to the WLS Single Switch Adapter M12 connector. Then tighten connec-
tor (see Figure 3).
Figure 3. WLS Single Switch Adapter BT1 & BT2 Connector to User-supplied Mating Cable
50054911
ISSUE 3
Honeywell Sensing and Control 15