Table of Contents
Advertisement
Limitless™ Series WLS Limit Switch
2.8.2 IC Compliance Statements
•
To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent
isotropic radiated power (EIRP) is not more than that permitted for successful communication.
•
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must ac-
cept any interference, including interference that may cause undesired operation of the device.
•
This Class B digital apparatus has been tested and found to comply with Canadian ICES-003.
•
French: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2.8.3 Radio Frequency (RF) Safety Statement (FCC & IC)
To comply with FCC's and Industry Canada's RF exposure requirements, the following antenna installation and device operating con-
figurations must be satisfied.
•
Remote antenna for this unit must be fixed and mounted on outdoor permanent structures with a separation distance be-
tween any other antenna(s) of greater than 20 cm and a separation distance of at least 20 cm [7.87 in] from all persons.
•
Furthermore, when using an integral antenna with the WLS, it must not be co-located with any other antenna or transmitter
device and have a separation distance of at least 20 cm [7.87 in] from all persons.
2.8.4 European Restrictions
•
Information regarding national restrictions can be found in document: ERC/REC 70-03 (Relating to the use of short-range
devices including appendixes and annexes). Documentation may be found in the document database in the European Com-
munication's office.
•
http://www.erodocdb.dk/doks/dochistory.aspx?docintid=1622
10
Honeywell Sensing and Control
50054911
ISSUE 3
Advertisement
Table of Contents
