Elite Models 8mm EPP Acrocub Instruction Manual page 8

Step13. Locate the white triangle foam block.
Step14. Glue this foam block onto the tail of
fuselage.
Step15. Glue two CF strips (185 x 8 x 1mm) into the
horizontal tail.
www.valuehobby.com/8mm-epp-acrocub.html
Step16. Glue the horizontal tail onto the fuselage.
Make sure the tab slot on the tail is aligned with
the centerline of the fuselage, and the tail is
parallel with the work surface.
Step17. Locate the vertical tail.
Step18. Glue the vertical tail on to the fuselage.
Make the tail is straight and vertical.
8