Elite Models 8mm EPP Acrocub Instruction Manual page 15

Step17. Use hook and loop strap to stick the esc to
the bottom fuselage.
(You also can put the esc onto the top of the
fuselage.)
Step18. Thread the ESC lead through the holes to
the bottom of the fuselage.
Step19. Glue the wing onto the saddle area of the
fuselage.
www.valuehobby.com/8mm-epp-acrocub.html
15
Step20. Apply the low temp hot glue to the
meeting lines between the fuselage and wing.
Step21. Locate two foam parts (cowling and
windscreen).
Step22. Use foam glue to glue them to the
fuselage.