Section4 Motor Installation - Elite Models 8mm EPP Acrocub Instruction Manual

Section4 Motor Installation

Step1. Prepare a 2206 motor, 8 x 4 prop and two
pieces of O-ring.
Step2. Use O ring to install the prop to the motor.
Step3. Use hot glue gun to glue the motor mount
to the fuselage.
Step4. Install the motor to the motor mount using
the screws provided with the motor.
Step5. Install the wing's and tail's side force
generator.
Step6. Use hook and loop strap to stick the receiver
and battery to two sides of the fuselage.