Elite Models 8mm EPP Acrocub Instruction Manual page 7

Step7. Locate another fuselage half and cut it into
two parts.
Step8. Use foam glue to install the CF strip (133 x 8
x 1mm) into the slot in the lower fuselage.
Step9. Glue the upper fuselage onto the other
fuselage half. Make sure the upper fuselage is
vertical and straight.
www.valuehobby.com/8mm-epp-acrocub.html
Step10. Glue the lower fuselage onto the other
fuselage half. Make sure the lower fuselage is
vertical and straight.
Step11. Apply the foam glue to the CF strip (240 x 8
x 1mm) and insert it in to the slot.
Step12. Glue in the gear leg plywood tips.
7