HYT TC-518 Owner's Manual page 25

Figure 2
Scan On/Off
You can enter scan mode through the following two methods:
1. Key operation
Press the programmed [Scan] key to enter scan mode, provided that there're no less than 2
members in the scan list.
2. Auto
When Auto Scan is enabled for a channel, the radio shall automatically enter scan mode when it
is switched to the channel.
You can exit scan mode through the following three methods:
1. Key operation
Press the programmed [Scan] key to exit scan mode.
2. Auto
The radio automatically exits from scan mode when it is switched to another channel.
3. Turn the radio off.
Talk Back
You can respond to any calls received during the scan process by pressing the [PTT].
Priority Channel Scan
Enable you to constantly monitor & keep an update on the activities on the most commonly used
channel so that messages will not be missed. Check with your dealer for details.
When scanning remains on a non-priority channel, the radio continues to monitor activities on
the priority channel, and jumps to the priority channel if activity is detected.
TC-518 Owner's Manual
23