Orbit ST 35D.1 Assembly Manual page 10

1.5.2 "PROGRAM" BUTTON
When treadmill is switched on, press this button to have exercise options from manual mode to pre-set
modes ( P1-P15,1 Body fat, U1-U3, HRC programs).
1.5.3 "MODE" BUTTON
When treadmill is switched on, press this button to choose countdown modes:"H-1","H-2","H-3";
H-1" is the time countdown mode, "H-2" is the distance countdown mode, "H-3" is the calorie countdown
mode;
press "SPEED+/-" or "INCLINE+/-"button to adjust the set values to desired values. After that, press "START"
button to start the treadmill.
1.5.4 "SPEED +/- "BUTTON
SPEED +/– --Adjust speed when treadmill starts, the increment is 0.1km with each press. Hold on
button for continuous adjustment.
1.5.5 SPEED QUICK BUTTON
Press speed quick button 4km/h，6km/h，8km/h, 10km/h, 12km/h , 16km/h, 18km/h to adjust speed
towards the desired speed when the treadmill is running.
1.5.6 "INCLINE+/-" BUTTON
INCLINE +/ – --Adjust incline when treadmill starts; the increment is 1 section with each press. Hold on the
button for continuous adjustment.
1.5.7 INCLINE QUICK BUTTON
Press incline quick button 2,4,6,8,10,12,15 to adjust incline level towards desired level when the treadmill is
running.
1.6. DISPLAY FUNCTION
1.6.1 SPEED
Display running speed in km/h.
1.6.2 TIME
Display total accumulated running time or countdown time left in a program.
1.6.3 DISTANCE
Display accumulated total distance or distance countdown.
1.6.4 CALORIE
Display accumulated calorie burnt or calorie countdown.
9