POWR
Removing the reed valve assembly
1. Remove the hoses 1.
2. Remove the intake manifold bolts 2, and
then remove the intake manifold cover,
gasket and reed valve assembly #1 3.
5
1
3. Remove the stay 4, intake manifold and
reed valve assembly #2 5.
Checking the reed valves
1. Check the reed valves for bends a.
Replace if above specification.
Valve bend limit a:
0.20 mm (0.0079 in)
5-21
Power unit
1
3
2
6F650260
2
4
6F650270
a
6H950280
2. Measure the valve stopper height b and
c. Replace if out of specification.
Valve stopper height b:
2.2—2.6 mm (0.87—0.102 in)
Valve stopper height c:
4.0—4.4 mm (0.157—0.173 in)
b
c
6H950290
6H95G11