Removing The Electrical Components; Removing The Throttle Pulley Assembly - Yamaha EK40G Service Manual

POWR
2. Remove the flywheel magnet.
cC
To prevent damage to the engine or tools,
screw in the flywheel puller set bolts
evenly and completely so that the fly-
wheel
puller plate is parallel to the flywheel mag-
net.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521
3. Remove the Woodruff key.
5-17
Power unit
6B450090

Removing the electrical components

1. Remove the bracket 1. (W: CDI unit,
starter motor, starter relay and rectifier)
2. Remove the base assembly 2.
3
3. Remove the spark plug caps from the
spark plugs, and then remove the ignition
coil 3.

Removing the throttle pulley assembly

1. Removing the throttle pulley assembly.
2
1
6F650210
6F650230
6H95G11