Sidewinder Operation; Before Operation Checklist - Aztec SIDEWINDER 24 Owner's Manual

SIDEWINDER OPERATION

This ultra-high speed VCT (vinyl composite tile) stripping and scrubbing machine is designed for
superior performance and long term durability. It includes a heavy-duty German engineered, precision
centrifugal clutch that will substantially increase the belt life. No application, other than ultra-high speed
VCT stripping and scrubbing, should be attempted nor is recommended. Call Aztec (800) 331-1423 for
any additional application questions.
First, refer to the SAFETY INFORMATION on pages 3-8, and complete the BEFORE OPERATION
CHECKLIST on page 12-13.
underside of machine and damage can occur to the machine, furniture, buildings and/or personal
injury.
at least 1 meter (3 feet) away from buildings and other equipment. Keep flammable materials away,
and do not place anything on the engine while it is running.
settings will void the warranty and injury can result. Refer to the equipment specifications.
required by OSHA based on engine volume, hearing protection is recommended while the machine is
in operation. In compliance with OSHA regulations, the operational weighted sound level of this
machine is less than 89dB(A).
fingers and hands. Use of gloves and limits to operator vibration exposure are recommended to
prevent such symptoms. The operational hand/arm vibration level of this machine is less than
2.5m/s2.
operation.
exists, contact an authorized service center.
04-2017
Never tilt back machine while engine is running. Objects may fly out from
The engine and exhaust become very hot during operation. Keep the engine
Factory engine speed is set at approximately 3400 RPM. Tampering with the
Continuous exposure to high noise levels can cause hearing loss. Although not
Prolonged exposure to machine vibration may cause tingling or numbness in the
Per OSHA standards, ear protection is not required, but is suggested during
All machines are equipped with tamper proof fuel systems. If a fuel problem
SIDEWINDER OWNER'S MANUAL PAGE 12