Download Print this page
Aztec SIDEWINDER 24 Owner's Manual
Hide thumbs Also See for SIDEWINDER 24:

Advertisement

Quick Links

24" & 30" Sidewinder WARRANTY
This quality product is warranted to be free from defects in workmanship and materials. The war-
ranty is limited as follows:
Component
Engine
Fuel System
LP Tank
Body Parts
Battery
Centrifugal Clutch
The warranty does not apply to certain consumable or wear parts such as:
Brushes
Belts
Engine tune up parts
All engines are warranted by the manufacturer (Kawasaki) for a period of two years when engine
maintenance schedules are followed.
Aztec Products, Inc. agrees, at its discretion, to repair or replace at its own expense any product
or part(s) which examination proves to be defective in workmanship or materials provided that
the purchaser notifies Aztec Products, Inc. directly within the warranty period and follows the
Return Goods Policy. Engine repairs may be performed at engine manufacturer's service cen-
ters. For your closest center you may call the following number:
Kawasaki
The warranty does not apply to damage or failure caused by abuse, misuse, neglect, disassem-
bly, alteration, unauthorized modification, lack of proper maintenance, theft, or damage by freight
carriers. The warranty applies to parts, labor and ground freight only. It does not cover inciden-
tal or consequential damages.
In order to obtain parts warranty, the following procedures must be followed:
1. Customer must call Aztec Products, Inc. for an RGA (Return Goods Authorization) Number.
2. We maintain the serial number, date of shipment or sale, and customer name on each piece
of equipment sold. If you were the purchaser, please reference that information on your request
for replacement or repair. If you purchased the equipment through a distributor, please contact
them first. If you are not satisfied, contact Aztec and give us the distributor name, purchase date,
and the serial number of the product.
3. The defective part must be returned via ground freight prepaid to Aztec Products, Inc. with an
RGA number accompanied by a copy of the original purchase invoice. Aztec is not responsible
for the cost of packaging inbound freight, nor inbound freight damage. Pack machine carefully.
4. Only Aztec Products, Inc. or its authorized dealers may make warranty repairs on Aztec
Products, Inc. products. Others do so at their own risk and expense.
5. We also offer to do warranty related repairs free of charge at our facility. Arrangements must
be made in advance as outlined above. We will not accept freight collect returns or returns that
do not indicate the RGA number on the packing list.
The need for proper maintenance and care for this product cannot be overstated. Poor mainte-
nance, neglect or abuse can prove to be very expensive.
You have purchased a quality product. Each of its components has been tested and approved for
use by Aztec Products, Inc. It is unlikely that you will ever have a warranty claim if you properly
maintain our machine.
This warranty is non-transferable.
AZTEC PRODUCTS, INC.
201 Commerce Drive • Montgomeryville, PA 18936 • 800-331-1423 • Fax 215-393-4800
8164/05.06
Term of Warranty
2 yrs from engine manufacturer
1 yr
1 yr on valve, 3 yrs on cylinder from date of mfgr.
1 yr
1 yr from battery mfgr.
1 yr
616-949-6500
OWNER'S MANUAL
SIDEWINDER
201 COMMERCE DRIVE • MONTGOMERYVILLE, PA 18936
215-393-4700 • 800-331-1423 • FAX 215-393-4800
24" & 30"
(Steel Body)

Advertisement

loading

Summary of Contents for Aztec SIDEWINDER 24

  • Page 1 You have purchased a quality product. Each of its components has been tested and approved for use by Aztec Products, Inc. It is unlikely that you will ever have a warranty claim if you properly maintain our machine.
  • Page 2: Transport & Preparation

    PG. 2 SIDEWINDER SIDEWINDER PG. 11 IMPORTANT SAFETY INSTRUCTIONS during and after operation. READ and UNDERSTAND all instructions and Do not leave this machine unattended while the engine is running. warnings before operating this machine! Do not operate equipment in one location for more than a few seconds.
  • Page 3 PG. 10 SIDEWINDER SIDEWINDER PG. 3 should be used in tilting the machine. This can 1. Every tank has been pressure and leak SIDEWINDER BRUSH OPTIONS be accomplished safely and easily as follows: tested. However, every time a tank is filled and/or connected to the machine it should COLOR CHARACTERISTICS...
  • Page 4 PG. 4 SIDEWINDER SIDEWINDER PG. 9 OPERATION B. Cleaning the equipment 1. Place machine in “tilt back” position. This machine is designed to deep scrub and/or strip 2. Rinse unit between top of brushes and hard surface floors in preparation for top coat or brush plate.
  • Page 5 PG. 8 SIDEWINDER SIDEWINDER PG. 5 Remember that being safe is a full-time, every holding the muffler bracket to the belt cover. day job. Follow all information posted on the Check if belt tension spring is attached to machine and the LP tank. the idler spring mount bolt on the body.
  • Page 6 PG. 6 SIDEWINDER SIDEWINDER PG. 7 NOTE: High and low idle speeds may vary depend- Oil Drain Plug KAWASAKI ENGINE MAINTENANCE SCHEDULE ing on the equipment on which the engine is used. • Close the oil drain valve. INTERVAL Refer to the equipment specifications. •...

This manual is also suitable for:

Sidewinder 30