Displaying Airport Signs; Terminal Procedure Charts - Garmin G1000 Reference Manual

Additional Features
displaying heading on the horizon
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) If not already enabled, press the SYN TERR Softkey.
4) Press the HRZN HDG Softkey.
5) Press the BACK Softkey to return to the previous page.

displaying Airport signs

1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) If not already enabled, press the SYN TERR Softkey.
4) Press the APTSIGNS Softkey.
5) Press the BACK Softkey to return to the previous page.

terminAl proCedure ChArts

NOTE: With the availability of SafeTaxi
electronic form, it is still advisable to carry another source of charts on-board
the aircraft.
safetaxi
®
SafeTaxi ® is an enhanced feature that gives greater map detail as the map range
is adjusted in on the airport. The airport display on the map reveals runways with
numbers, taxiways identifiers, and airport landmarks including ramps, buildings,
control towers, and other prominent features. Resolution is greater at lower map
ranges. The aircraft symbol provides situational awareness while taxiing.
Pressing the DCLTR Softkey (declutter) once removes the taxiway markings and
airport identification labels. Pressing the DCLTR Softkey twice removes VOR station
ID, the VOR symbol, and intersection names if within the airport plan view. Pressing
the DCLTR Softkey a third time removes the airport runway layout, unless the airport
in view is part of an active route structure. Pressing the DCLTR Softkey again cycles
back to the original map detail.
The SafeTaxi database contains detailed airport diagrams for selected airports.
These diagrams aid in following ground control instructions by accurately displaying
44
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
, ChartView, or FliteCharts
®
in
®
190-00600-02 Rev. A