Gmc 710 Message Advisories; Miscellaneous Message Advisories - Garmin G1000 Reference Manual

gmC 710 messAge Advisories

Message
GMC CONFIG – GMC Config error.
Config service req'd.
GMC FAIL – GMC is inoperative.
MANIFEST – GMC software
mismatch. Communication halted.
GMC KEYSTK – GMC [key name]
Key is stuck.

misCellAneous messAge Advisories

Message
FPL WPT LOCK – Flight plan
waypoint is locked.
FPL WPT MOVE – Flight plan
waypoint moved.
TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has
190-00600-02 Rev. A
Comments
Error in the configuration of the GMC 710.
A failure has been detected in the GMC 710.
The GMC 710 is unavailable.
The GMC 710 has incorrect software installed.
The G1000 system should be serviced.
A key is stuck on the GMC 710 bezel. Attempt
to free the stuck key by pressing it several
times. The G1000 system should be serviced if
the problem persists.
Comments
Upon power-up, the G1000 system detects
that a stored flight plan waypoint is locked.
This occurs when an aviation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
The system has detected that a waypoint
coordinate has changed due to a new aviation
database update. Verify that stored flight plans
contain correct waypoint locations.
expired.
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Annunciations & Alerts
73