Displaying Garmin Terrain-Hsvt ™ Terrain; Displaying Heading On The Horizon; Displaying Airport Signs - Garmin G500H Cockpit Reference Manual

PRIMARY FLIGHT DISPLAY (PFD)
The following features are part of the Terrain-HSVT system. For more details
refer to the latest revision of the G500H Pilot' s Guide, 190-01150-02.
• Flight Path Marker
• Horizon Heading Marks
• Terrain/Obstacle Display and Alerting
• Three-dimensional Traffi c
NOTE: Terrain-HSVT may be deactivated under certain conditions, such
as loss of heading. Once condition is resolved, reactivate Terrain-HSVT,
press the PFD soft key followed by the SYN VIS soft key, then the SYN
TERR soft key.
NOTE: Terrain-HSVT features are not a substitute for standard course
and altitude deviation information using the CDI, VSI, and VDI.
Displaying Garmin Terrain-HSVT
1) Press the PFD soft key.
2) Press the SYN VIS soft key.
3) Press the SYN TERR soft key.
4) Press the BACK soft key to return to the previous page.

Displaying Heading on the Horizon

1) Press the PFD soft key.
2) Press the SYN VIS soft key.
3) If not already enabled, press the
4) Press the HRZN HDG soft key.
5) Press the BACK soft key to return to the previous page.

Displaying Airport Signs

NOTE: The 'Airport Signs' feature will only display airports, not heliports.
1) Press the PFD soft key.
2) Press the SYN VIS soft key.
3) If not already enabled, press the
4) Press the APTSIGNS soft key.
5) Press the BACK soft key to return to the previous page.
16
™
SYN TERR soft key.
SYN TERR soft key.
G500H Cockpit Reference Guide
• Airport Signs
• Runway Display
• Water
• Zero-Pitch Line
Terrain
190-01150-03 Rev B