Nav/Com/Transponder/Audio Panel; Enter Or Change Flight Id; Adf Tuning (Optional); Dme Tuning - Garmin G1000 Reference Manual

nAv/Com/trAnsponder/Audio pAnel

enter or ChAnge Flight id

1) Press the TMR/REF Softkey, then turn the large FMS Knob to highlight the
Flight ID field.
2) Turn the small FMS Knob to enter the first character.
3) Turn the large FMS Knob to select the next field.
4) Turn the small FMS Knob to enter the next desired character.
5) Repeat steps 3 and 4 until the desired Flight ID is entered.
6) Press the ENT Key. In the FLT ID field, 'updating' is momentarily displayed.
Do not perform any other G1000 functions until 'updating' is no longer
displayed.

AdF tuning (optionAl)

1) Press the ADF/DME Softkey.
2) Turn the small FMS Knob to enter the first digit of the desired ADF
frequency.
3) Turn the large FMS Knob to select the next desired field.
4) Turn the small FMS Knob to enter the desired number.
5) Repeat steps 3 and 4 until the desired ADF frequency is entered.
6) Press the ENT Key to accept the new frequency.
7) Press the ENT Key again to transfer the frequency to the active field.
8) Turn the large FMS Knob to select the MODE field.
9) Turn the small FMS Knob to select ANT, ADF, ADF/BFO, or ANT/BFO.
10) Press the ENT Key to complete the selection.

dme tuning

1) Press the ADF/DME or DME Softkey.
2) Turn the large FMS to select the DME source field.
3) Turn the small FMS Knob to select the desired Nav radio.
4) Press the ENT Key to complete the selection.
190-00600-02 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
nav/Com/xpdr/Audio panel
7