seleCting the Altimeter bArometriC pressure setting
Turn the BARO Knob to select the desired setting.
seleCting stAndArd bArometriC pressure
Press the BARO Knob.
ChAnge Altimeter bArometriC pressure setting units
1) Select the PFD Softkey to display the second-level softkeys.
2) Select the ALT UNIT Softkey.
3) Select the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or:
Select the HPA Softkey to display the barometric pressure setting in
hectopascals.
4) Select the BACK Softkey to return to the top-level softkeys.
synChronizing the Altimeter bArometriC pressure settings
1) Select the AUX-SYSTEM SETUP Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight BARO in the SYNCHRONIZATION
Window.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
synChronize Cdi
1) Select the AUX-SYSTEM SETUP Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight CDI in SYNCHRONIZATION Window.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
190-00600-02 Rev. A
Flight instruments
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Flight instruments
1