Fireplace Requirements - Avalon Radiant Plus Small Insert Owner's Manual

8
Installation (for qualified installers only)

Fireplace Requirements


Insert must be placed within a code-conforming masonry fireplace or tested and listed factory-
built (metal) wood-burning fireplace. Repair any fireplace damage prior to installation.

Because the insert may use an optional circulation blower, clean the fireplace, smoke shelf, and
chimney prior to installation.

This heater may be placed in a bedroom. Please be aware of the large amount of heat this
appliance produces when determining a location.
f
a
e
h Attach the "This fireplace has been altered..." plate to the fireplace (use two screws or other
suitable method). You may wish to place it in a location where it will be covered by the surround
panels or face.
© Travis Industries
b
c
d
Fireplace Sizing
a
Minimum Height
b
Minimum Width
c
Minimum Depth
d
Hearth Extension
The gas line should be installed prior to installing
e
the heater.
h
For tight fits (under 28") see the section
f
"Removing the Vent Connector"
g
g
See "Leveling Legs" for details on leveling the
heater.
4151204
19.75" (502mm)
27" (686mm)
15" (381mm)
0" (0mm)
100-01430