Starting The Pilot; Starting The Heater For The First Time - Avalon Radiant Plus Small Insert Owner's Manual

Starting the Pilot

Remove the glass frame before starting the pilot.

Starting the Heater for the First Time


Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This
is normal. We recommend opening a window to vent the room.

Condensation may appear on the glass each time you start the heater - this is normal.

Blue Flames will occur on the heater when it first comes on. After fifteen minutes the flames will turn
a more realistic yellow and orange color.

Verify the power backup and control light batteries are installed (see page 37).
© Travis Industries
Operation
4151204
31
100-01430