Vent Connector Removal And Installation (Continued) - Avalon Radiant Plus Small Insert Owner's Manual

18
Installation (for qualified installers only)

Vent Connector Removal and Installation (continued)

This screw holds the
connector in place.
1/4" Nutdriver
The vent connector slides back and disengages from the three tabs on top of the insert.
Connect the flex vent (exhaust and intake) to the vent connector (use self-drilling screws or hose clamps).
"I" Intake
© Travis Industries
"E" Exhaust
4151204
The vent connector may be removed.
When replacing, make sure the gasket
under the connector remains in place.
100-01430