Installing The Switch In A 19-Inch Rack; Installation Accessories - HP FlexFabric 5950 Series Installation Manual

Installing the switch in a 19-inch rack

IMPORTANT:
To install the switch in a 19-inch rack, make sure the rack has a minimum depth of 1000 mm (39.37
in) so that the rack door can be closed easily.

Installation accessories

Table 5 Installation accessories
Switch
model
HPE 5950
32QSFP28
HPE 5950
48SFP28
8QSFP28
HPE 5950
4-slot
Figure 2 Mounting brackets for the HPE 5950 32QSFP28 switch
Figure 3 Mounting brackets for the HPE 5950 48SFP28 8QSFP28 switch
Mounting brackets
A pair of 1U mounting
brackets. See Figure 2.
1U high, one pair. See Figure
3.
2U high, one pair. See Figure
4.
Rack mounting rail kit
•
A pair of 1U long slide rails and one pair of chassis
rails. See Figure 6.
•
(Optional.) A pair of 1U short slide rails and one pair
of chassis rails. See
•
1U high, including one pair of long slide rails and one
pair of chassis rails (provided). See
•
2U high, including one pair of slide rails and one pair
of chassis rails (provided). See
8
Figure 5.
Figure 6.
Figure 7.