Table of Contents
Advertisement
Figure 36 Removing the filler panel from the expansion slot
Keep the removed filler panel secure for future use.
3.
Unpack the expansion card.
Figure 37 LSWM18CQ interface card
1
(1) Ejector lever
4.
Press the latch on the expansion card to release the ejector lever.
5.
Insert the expansion card slowly into the slot along the guide rails, as shown by callout 1 in
Figure
37.
6.
Rotate inward the ejector lever as shown by callout 2 in
ejector lever in place.
Figure 38 Installing the LSWM18CQ interface card
2
1
1
2
28
1
2
(2) Latch
Figure 37
until the latch locks the
Hide quick links:
Advertisement
Table of Contents
