Hpe 5950 4-Slot - HP FlexFabric 5950 Series Installation Manual

The HPE 5950 48SFP28 8QSFP28 switch comes with power supply slot PWR1 empty and power
supply slot PWR2 installed with a filler panel. You can install one or two power supplies for the switch
as needed. In
The HPE 5950 48SFP28 8QSFP28 switch comes with the five fan tray slots empty. You must install
five fan trays of the same model for the switch. In
trays are installed in the fan tray slots.
The HPE 5950 48SFP28 8QSFP28 switch comes with a dust plug in the fiber management Ethernet
port on the rear panel. To use the fiber management Ethernet port, first remove the dust plug. In
Figure 55, the dust plug has been removed from the fiber management Ethernet port.
Figure 56 Left panel
(1) Primary grounding point

HPE 5950 4-slot

Figure 57 Front panel
(1) Expansion card 1
(3) Expansion card 4
Figure 55, two 650W AC power supplies are installed in the power supply slots.
1
Figure 55, five X712 Bck(pwr)-Frt(prt) HV2 fan
(2) Auxiliary grounding point
1
4
(2) Expansion card 2
(4) Expansion card 3
46
2
2
3