Installing The Switch - HP FlexFabric 5950 Series Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact Hewlett Packard Enterprise Support for permission. Otherwise, Hewlett
Packard Enterprise shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
No
Install expansion cards
Start
Install the switch
Ground the switch
Install fan trays
Install power modules
Connect power cords
Verify the installation
Turn on the circuit
breakers
Operating correctly?
Yes
Install expansion
cards?
Yes
Operating correctly?
Yes
End
Troubleshoot the
switch
No
Turn off the circuit
breakers
No
Resolve the
problem
7