Genie Z-45/22 Service Manual page 208

Service Manual - Second Edition
800-610-4101
ActionRental.com
9 Attach a strap from a lifting device to the yoke/
torque hub assembly and support it.
10 Use a soft metal drift to drive the king pin down
and out.
Crushing hazard. The yoke/torque
hub assembly will fall when the
king pin is removed if it is not
properly supported.
11 Place the yoke/torque hub assembly on a flat
surface with the torque hub down. Remove the
bolts that secure the yoke to the torque hub.
Specifications
Lug nut torque
Nm
14-2
Steering Cylinders
How to Remove the Steering
Cylinder
This procedure is the same as the 2WD
procedure. See repair procedure 13-2, How to
Remove the Steering Cylinder.
Part No. 32960
14-3
Tie Rod
How to Remove the Tie Rod
Weldment
This procedure is the same as the 2WD
procedure. See repair procedure 13-3, How to
Remove the Tie Rod Weldment.
How to Perform the Tie Rod
Toe-in Adjustment
This procedure is the same as the 2WD
procedure. See repair procedure 13-3, How to
125 ft-lbs 169 Perform the Tie Rod Toe-in Adjustment.
Genie Z-45/22
Section 7 - Repair Procedures
4WD STEERING AXLE COMPONENTS
7 - 55