Inclusion & Exclusion - Dome DMWS1 User Manual

Inclusion
Follow the instructions for your Z-Wave Certified Conto enter inclusion mode.
When prompted by the controller:
1. The Leak Sensor should be within 10' of your Z-Wave controller for the inclu-
sion process. After successful pairing, the device can be brought to the desired
location.
2. Remove the MAIN BODY COVER by twisting it apart counter-clockwise.
3. Remove the BATTERY TAB.
4. Press the BUTTON quickly 3 times in a row.
The INDICATOR LED will flash five times indicating inclusion.
Exclusion
Follow the instructions for your Z-Wave Certified Conto enter exclusion mode.
When prompted by the controller:
1. Remove the MAIN BODY COVER from the MAIN BODY BASE.
2. Press the CONNECT BUTTON quickly 3 times in a row.
The INDICATOR LED will flash five times indicating exclusion/disconnection.
Leak Sensor Advanced User Manual
Inclusion & Exclusion
Inclusion & Exclusion
Page 7