Button Behavior - Dome DMWS1 User Manual

Action
Press and hold
CONNECT BUTTON
for 2 seconds
Push
Included, and Controller is
CONNECT BUTTON
3 Times
Press and hold
CONNECT BUTTON
for 10+ seconds
Press and Hold for
10+ seconds
Leak Sensor Advanced User Manual

Button Behavior

Button Behavior
Condition
Leak Sensor Already
Included in System
Leak Sensor Already
Included in System
Leak Sensor Already
in Exclusion Mode
Leak Sensor Not Yet
Included in System, and
Controller is in Inclusion
Mode
Leak Sensor Already
Included in System
Any condition (as long as
the device has power)
Table 3 - Button Behavior
Result
Device sends a wake up notification to its
controller, awaits further instructions, and blinks
the LED Indicator once
Device sends node info to Group 1
Device is excluded from the system and removes
the Home ID from its memory
Device enters inclusion mode and includes into
whichever network is also in inclusion mode
Device will be reset to factory settings, and a
DEVICE_RESET_LOCALLY command will be sent to
Node 1
The device's memory will erase to factory default
settings and any associations, configuration param-
eters, and other locally saved data will be lost
Page 12