Compatible Command Classes - Dome DMWS1 User Manual

Compatible Command Classes

Command Class
Device Reset Locally V1 (0x5A)
Powerlevel V1 (0x73)
Association Group Information V1 (0x59)
Z-Wave Plus Info V2 (0x5E)
Manufacturer Specific V2 (0x72)
Wake Up V2 (0x84)
Binary Sensor (0x30)
Leak Sensor Advanced User Manual
Compatible Command Classes
Notes
Battery V1(0x80)
Z-Wave Plus Version: 01
Role Type: 06
Node Type: 00
Installer Icon Type: 0C 05
User Icon Type: 0C 05
Z-Wave Library Type: 06
Protocol Version: 04 05
Version V2 (0x86)
Protocol Sub-Version: 02 28
Application Version: 10
Application Sub-Version: 00
Manufacturer ID: 02 1F
Product Type: 03
Product ID: 00 85
The wake-up interval is set in seconds, and is 43,200 seconds (12 hours)
by default. The wake-up interval can be set to any value from 300s (5
minutes) to 16,777,200s (about 190 days) in 60-second increments.
The Leak Sensor also sends a Binary Sensor Report when a leak is
detected or removed. See below for the SENSOR_BINARY_REPORT
parameters sent:
Sensor Type: 06
Leak Detected Value: 0xFF
Leak Removed Value: 0x00
Table 4 - Command Classes
-
-
-
-
Returned Value: 01 06 00 0C 05 0C 05
(Slave Sleeping Reporting)
(Z-Wave Plus Node)
(Water Alarm)
(Water Alarm)
Returned Value: 06 04 05 02 28 10 00
(Routing Slave)
Returned Value: 02 1F 03 01 85
(Water)
Page 13