Juniper EX9200 Features Manual page 53

Results
Copyright © 2016, Juniper Networks, Inc.
Chapter 3: Copy Packets to a VLAN or Bridge Domain for Remote Monitoring
[edit forwarding-options]
user@device# set analyzer employee-monitor input ingress bridge-domain
remote-analyzer
user@device# set analyzer employee-monitor output interface ge-0/0/5.0
Specify mirroring parameters such as rate and the maximum packet length for
the
employee-monitor
[edit]
user@device# set forwarding-options analyzer employee-monitor input rate 2
user@device# set forwarding-options analyzer employee-monitor input
maximum-packet-length 128
Bind the
employee-monitor
[edit]
user@device# set chassis fpc 0 port-mirror-instance employee-monitor
Check the results of the configuration on the source switching device:
[edit]
user@device# show
bridge-domains {
remote-analyzer {
vlan-id 999;
}
}
forwarding-options {
analyzer {
employee-monitor {
input {
ingress {
interface ge-0/0/0.0;
interface ge-0/0/1.0;
}
egress {
interface ge-0/0/0.0;
interface ge-0/0/1.0;
}
maximum-packet-length 128;
rate 2;
}
output {
bridge-domain {
remote-analyzer;
}
}
}
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family bridge {
interface-mode access;
vlan-id 99;
}
analyzer.
analyzer to the FPC containing the input ports.
39