Pro-Form VIBE 980 ZL User Manual page 4

15. When connecting the power cord (see page
9), plug the power cord into an earthed cir-
cuit. No other appliance should be on the
same circuit.
16. If an extension cord is needed, use only a 3-
conductor, 1mm (14-gauge) cord that is no
2
longer than 1.5 m (5 ft.).
17. Keep the power cord away from heated sur-
faces.
18. Never leave the vibration platform unattend-
ed while it is running. Always unplug the
power cord and switch the on/off switch cir-
cuit breaker to the off position when the
vibration platform is not in use. (See the
drawing on page 5 for the location of the cir-
cuit breaker.)
DANGER:
19.
cord when the vibration platform is not in
use and before cleaning the vibration plat-
form. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.
4
Always unplug the power