Time Cook - Hotpoint RH967 Use And Care Book Manual

Automatic cooking control
Table of Contents

Advertisement

Howto USethe Hold/Timer
Your HOLD/TIMER, which oper-
e
ates without
microwave energy,
has three timing functions.
It operates as a Minute Timer, it
can be set to delay cooking or may
be used as a hold setting after de-
frosting. Hold/Timer can be set up
to 99 minutes.
~ Step I: Touch HOLD/TIMER pad.
The read-out panel shows :0. "En-
ter Time" flashes.
Step 2: Select the amount of time
you desire. Touch the appropriate
number pads. If, for example, you
are timing a three minute phone
call, touch 3, 0 and O.The readout
panel shows 3:00 and "HOLD"
appears on display.
Step 3: Touch START. The readout
display shows the time as it counts
down, and "Hold Time Left".
Step 4: When time is up, oven
sounds. The readout flashes "END"
and the timer turns off.
The HOLD/TIMER
can also be
used to program "standing time"
between microwave cooking func-
tions. The time can range from one
second to 99 minutes and 99 sec-
onds. A HOLD, or "standing"
time
may be found in some of your own
recipes or Cookbook.
To set the oven to delay cooking
up to 99 minutes follow Steps 1
and 2 to enter hold time, then set
time or temperature desired before
pressing START. When holding be-
fore temperature cooking, be sure
probe is in food before pressing
START.
How k)
Defrost–Hold/Time–Time Cook
To help you become acquainted with the HOLD/TIMER feature as used with Time Cook or Temp Cook
follow Steps below to defrost a frozen casserole for 15 minutes, then hold 10 minutes and then cook 25 minutes.
If using Temp Cook after Hold/Timer,
be sure to insert probe correctly as shown in Automatic
Roasting
section of this book.
Step 1: Remove casserole from the
freezer and place in oven. Touch
the DEFROST pad. The readout
panel shows "Enter Def Time", :0,
Step 2: Touch 1, 5, 0 and O for
defrosting time. Def Time, 15:00,
and Power3 appear on the display
panel. (Defrosting is automatically
set on Power Level 3 but can be
changed
by touching
POWER
LEVEL pad and the new Power
Level.)
Step 3: Set standing Or hold time
by touching HOLD/TIMER. "Enter
Time" and :0 appear on display.
Step 4: Touch 1, 0, 0, and Oto hold
for ten minutes. 10:00 and "HOLD"
appear on the display.
step 5: Touch the
TIME COOK
pad. The display shows "Enter
Cook Time",
:0, and Power 10
(HIGH).
Step 6: Touch 2, 5, 0, and O for
twenty-five
minutes
of cooking
time. "Cook
Time",
25:00, and
Power
10 appear
on the dis-
play panel.
Step 7: Touch START. "Def Time
Left", Power 3, and 15:00 counting
down show on display. As each
function
is automatically
per-
formed oven display shows en-
tered information.
Questions
Q. Can I Defrost-t-iold only on my
Q. I programmed my oven for a
oven?
and
Answers
specific defrosting time b~t it de-
A. Sometimes you may want to de-
frosted
longer than necessary,
frost a food, hold it, and refrigerate
What happened?
it to be cooked later. All you need
A. When instructions conflict, the
Q. What will happen if I acciden-
to do is program in Defrost and
oven carries out the last instruc-
tallv reverse the instructions?
amount
of time. Then pro'gram
tion. You may have set the oven to
--. ,--------
–_______
A. if you accidentally reverse the
Hold and amount of time. Put your
Defrost for 4 minutes, Hold/Time
equence of programming instruc-
thawed dish in the refrigerator and
for 2 minutes, and then Defrost for
ens, your oven automatically
cook later at a convenient time.
6 minutes. In this case, the oven
rearranges vour cxo~ram. Defrost-
NOTE: Allow foods to remain at
would Defrost for 6 minutes and
ing alw~ys ~omes fi~st, then hold,
room temperature only as long as
Hold/Time for 2 minutes.
and then the cooking function.
safe. Times will vary.
K
@E-
E i%
K
e

Advertisement

Table of Contents
loading

Table of Contents